Technical

A material to shape, build and transform

Form'it is a patented shape-memory material combining a flexible aluminium core with a laminated surface. It can be shaped by hand and retains the form you give it.

At a glance


Roll size
1.20 m wide x approximately 10 m long
Area
Approximately 12 m² per full roll
Weight
Approximately 275-360 g/m², depending on finish
Roll weight
Approximately 3.3-4.32 kg of material per full roll, depending on finish
Thickness
Approximately 0.14-0.90 mm, depending on finish
Core
Flexible aluminium; standard core approximately 80 microns
Shaping
Shape by hand at room temperature - no heat gun or specialist forming equipment required
Fire
Flame-retardant treatment. M1 certification applies to relevant finishes
Outdoor
Suitable for indoor and, for selected finishes, outdoor use
Reuse
Can be flattened, reshaped and reused
Origin
Designed and manufactured in France

Exact weight, thickness, fire classification and outdoor suitability vary by finish.

Size, weight & construction


All Form'it rolls are approximately 1.20 m wide and 10 m long, providing approximately 12 m² per full roll. The standard construction uses an approximately 80-micron flexible aluminium core with a laminated surface.

Finish group Weight Thickness Approx. weight / full roll
Mirror finishes 275 g/m² 0.14 mm 3.30 kg
Snow 330 g/m² 0.90 mm 3.96 kg
Standard textile / printed finishes Approx. 350-355 g/m²* Approx. 0.35 mm* Approx. 4.20-4.26 kg*
Other published finishes Approx. 300-360 g/m²* Finish-specific Approx. 3.60-4.32 kg*

*Individual finishes may differ. The specification for the selected finish takes precedence.

Finish range


28+ finishes, grouped by feel

Click a finish to see it up close and watch it move. Weight and thickness are shown per finish group above - individual finishes within a group are consistent unless noted.

Nature

Deco

Just launched

Images and video for these finishes are still with the manufacturer - added here as soon as they're supplied.

Working with Form'it


Gloves are recommended when cutting, shaping or installing because the aluminium base can create sharp edges.

Structures & installation


Form'it can be self-supporting depending on the shape, size and configuration. Larger forms can be integrated with lightweight timber or aluminium structures. Fixing methods include Velcro, glue and staples, and strong adhesive can be used to join sections and create large-scale installations. For joined strips, the manufacturer recommends an overlap of approximately 10 cm and cites gel or liquid neoprene as suitable adhesives.

Fire, outdoor use & safety


Fire

Form'it finishes are supplied with flame-retardant treatment. M1 certification applies to relevant finishes, and NFPA 701 is available on a number of finishes. Fire classification is finish-specific.

Outdoor use

Outdoor suitability is finish-specific. Form'it is primarily designed for indoor use; prolonged exposure to heavy rain, wind or extreme moisture is not recommended without appropriate protection.

Safety

Wear gloves when cutting, shaping or installing.

Responsible product & certification


Customisation


Need the specification for a particular finish?

Contact us for samples